Panel Unit - Brother DCP-7057 Service Manual

9.14

Panel Unit

9.14.1 Panel Unit
(1) Remove the four taptite cup B M3x10 screws.
(2) Release the claw to remove the panel unit.
Note:
• Be careful not to pull the panel unit generic strongly because the harness is
connected to it.
(3) Disconnect the connector of the panel harness ASSY from the panel PCB ASSY.
Connector
(Panel harness ASSY)
Backside view
Taptite cup B M3x10
Panel PCB ASSY
Panel unit
Taptite cup B M3x10
Claws
Fig. 3-52
3-67
Claws
Confidential