Table of Contents
Advertisement
UK
Maintenance
After 10 hours of operation, retighten the machine. Check hydraulic hoses, fittings and cylinders for
leaks and retighten.
Further check on a regular basis that all bolts are tightened.
Before the winter storage, wash and lubricate the machine. If you use high-pressure cleaner, do not
spray directly on the ball bearings. After the washing, you may spray the machine with oil.
Lubrication
For lubrication, maintenance and repair, lower the Sub-Tiller, put the brakes of the tractor on and stop
the motor.
The 3.0 m, 3.5 m and 4.0 m Combi-Tiller (rigid) have 5 lubricating points, and the 4.0 m and 5.0 m
Combi-Tiller (hydraulic) have 20 lubricating points, all Combi-Tiller models must be lubricated after
every 30 working hours as well as after the cleaning in order to press out any water and dirt. The
lubricating points on the rigid machines are located at the movable linkage and at the cylinder as well.
The lubricating points on the hydraulic models are furthermore located where the wing sections are
hinged on the middle section and at the support wheels.
Moreover, the machines with hydraulic automatic release system have 2 lubricating points per tine
which are to be lubricated after 10 hours of operation.
Lubricating point
X
X
Important!
Combi-Tiller MK II
X
X
X
Oil, type Hydro Texaco HD32 has been
filled in the hydraulic system.
X
X
X
X
X
X
13
30/04-2019
X
X
X
X
Back to the table of contents
X
X
Advertisement
Table of Contents
