Table of Contents
Advertisement
UK
Safety instructions for Combi-Tiller
Do not start-up the machine if there are persons in exposed positions* within a hazardous area**.
When persons are in exposed positions (e.g. in connection with adjustment, maintenance, attachment
and uncoupling), the following conditions must be observed:
The machine must be lowered to firm ground.
The hydraulics must be relieved.
The tractor must be stopped and the key removed from the ignition switch.
The driver must ensure that no persons are staying in exposed positions during the operation.
* Person in exposed position: Any person who is staying wholly or partly within a hazardous area.
** Hazardous area: On and under the machine within a distance of 4 m from the machine.
Most accidents that happen in connection with the operation, transport and maintenance of machines
are caused by non-compliance with the most elementary safety conditions.
Therefore it is vital that anybody working at the machine carefully complies with the safety
instructions as well as other instructions applying to the machine.
The machine may only be operated, maintained and repaired by persons, who are familiar with this
work and who are further familiar with the possible elements of danger with this particular machine.
ATTENTION!!
IMPORTANT!!
Combi-Tiller MK II
Rotary parts and loose clothes are a dangerous combination.
In connection with the risk of parts falling down, it may endanger the lives
of persons staying on the base frame of the machine, when it is operated
attached to a tractor.
5
30/04-2019
Back to the table of contents
Advertisement
Table of Contents
