Webconsole - Modules Options; Modules Overview - AMX NCITE-813 Instruction Manual

WebConsole - Modules Options

Modules Overview

The Modules page is accessed by clicking Modules on the page's main heading. This page allows you to view and configure
various aspects of the NetLinx System:
Device Options - Options on this page display various details specific to additional (non-NetLinx) System Devices. See

the Modules - Device Options section on page 83 for details.
Bindings - Options on this page allow you to view the details of additional attached devices (including module-supported

third-party devices). See the Modules - Bindings section on page 84 for details.
User-Defined Devices - Options on this page provide a listing with all of the dynamic devices that have been discovered

in the system, and allow you to add and delete User-Defined Devices. See the Modules - User-Defined Devices section on
page 87 for details.
Active Devices - Options on this page allow you to check devices for compatible Duet Modules. See the Modules - Active

Devices section on page 88.
The default view for the Modules option is Device Options (FIG. 86).
FIG. 86
Modules - Device Options page
NOTE:
This page is only available on the NCITE-813AC Presentation System.
Instruction Manual - Incite Digital Video Presentation Systems
WebConsole - Modules Options
82