DVX-2100HD WebConsole
The DVX-2100HD features an on-board WebConsole that allows you to configure the device and make
various adjustments to audio/video and system settings. The WebConsole is accessed via a web browser on a
PC that has network access to the DVX-2100HD.
The DVX-2100HD WebConsole can be divided into two primary parts:
Accessing the WebConsole
From any PC that has access to the LAN that the target DVX-2100HD resides on:
1.
Open a web browser and type the IP Address of the target DVX-2100HD in the Address Bar.
2.
Press Enter to access WebConsole for that DVX-2100HD. The initial view is the WebControl page
(FIG. 50).
System/Device info:
System (read-only): indicates the name of the System currently connected
Device: click the down-arrow to select from a list of all devices connected to this Master
Refresh: Click to refresh the Device list.
Click to Login (only required if Master Security
and HTTP Access security options are enabled
on the target Master)
FIG. 50
Master Configuration Manager - WebControl Page (initial view)
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
Audio/Video Switcher Configuration Settings
Master Controller Configuration Options
Select this option to show/hide the Online Device Tree
(showing all devices currently connected to this Master)
Click to access the three main sections of the WebConsole
(initial view = WebControl)
Audio/Video Configuration
47