Table of Contents
Advertisement
NCITE-813AC Specifications (Cont.)
Onboard Master:
Controller:
Memory:
Processor:
Program Port:
Configuration Dip Switch:
ID Pushbutton:
Status Indicator:
Input Indicator:
Output Indicator:
USB Host Port:
Control Parts and Indicators:
AxLink Port (1):
AxLink Indicator:
RS-232/422/485 Port:
RS-232 Port:
Serial Indicator:
IR/Serial:
IR/Serial Indicators:
I/O Channels:
I/O Indicator:
Relays:
Relays Indicators:
Integrated Matrix Switcher Control:
Source Select Buttons
1-8:
Navigation Control (Up,
Down, Left, Right, Select):
Menu On/Off:
Instruction Manual - Incite Digital Video Presentation Systems
Integrated Controller is the equivalent of a NetLinx NX-2200 Integrated Controller
•NVRAM: 1 MB
•Memory Card: 16 GB SD
•DDRAM: 1 GB
NOTE:
Supports external USB Solid State Drive
1600 MIPS
(1) USB Standard B
4-Position
Black ID pushbutton for setting IP mode and reverting to default configuration and firmware It has no effect on the
Internal Switcher Device.
Status LED (green) blinks to indicate that the system is programmed and communicating properly
Input LED (yellow) blinks to indicate that the Controller is receiving data
Output LED (red) blinks to indicate that the Controller is transmitting data
(2) USB Standard A, one on front and one on back, USB Host port supports Solid State drive for upgrading firmware, loading
code files, copying configuration data and remote storage
(1) 4-position 3.5mm Screw Terminal, provides data and power to external AxLink control devices
(1) AxLink LED (green) indicates the state of the AxLink port
• (1) 10-position 3.5mm Screw Terminal
•NetLinx Port 1
• XON/XOFF (transmit on / transmit off)
• CTS/RTS (clear to send/ready to send)
• 300 - 115,200 baud
• (3) 5-position 3.5mm Screw Terminal
•NetLinx Ports 2-4
• XON/XOFF (transmit on / transmit off)
• CTS/RTS (clear to send/ready to send)
• 300 - 115,200 baud
(4) sets of LEDs (red/yellow) indicate when serial Ports 1-4 are transmitting and receiving data
• (4) 2-position 3.5mm Screw Terminal
• 4 IR Transmit / 1-way Serial ports
•NetLinx Ports 11-14
• Support high-frequency carriers up to 1.142 MHz
• 4 IR/Serial data signals can be generated simultaneously
(4) LEDs (red) indicate when each of the IR/Serial ports (11-14) are transmitting control data
• (4) One 6-position 3.5mm Screw Terminal
• 4-channel binary I/O port for contact closure with each
• input being capable of voltage sensing
•NetLinx Port 22
• Channels 1-4
(4) LEDs (yellow) indicate each of the I/O channels (1-4) are active
• (4) One 2-position 3.5 mm Screw Terminal, (4) singlepole, single-throw relays
•NetLinx Port 21
• Channels 1-4
• Each relay can switch up to 24 VDC or 28 VAC @ 1 A
• Each relay is independently controlled
(4) LEDs (red) indicate when each of the relay channels (1-4) are active (closed)
Press to select audio and video source selection.
For on-screen menu navigation and selection
For entering or exiting on-screen menu mode
Incite Digital Video Presentation Systems
20
Advertisement
Table of Contents
