Table of Contents
Advertisement
Chapter 3: Room Switcher Configuration Options
This chapter defines the N7142 Room Switcher configuration options accessible via the On-Screen Display (OSD) setup menu.
Once the unit completes the boot up process and the attached monitor displays the AMX logo, press the MENU button (on the front
panel of the unit) to access this interface. The Quick Setup page (shown in
Use the corresponding arrow and ENTER keys (on the front panel) to navigate and make changes to the setup.
For ease of navigation, this chapter is organized to reflect the OSD interface.
links to the chapter's sections which describe each main page.
Quick Setup Page
User Presets Page
Input Page
Output Page
Networking Page
Audio Page
Advanced Page
Device Info Page
FIG. 11 Section Links
N7142 User Manual
on page 15.
on page 16.
on page 17.
on page 18.
on page 19.
on page 20.
on page 21.
on page 22.
Room Switcher Configuration Options
Figure
11) displays first.
Figure 11
shows the navigation bar and provides hot
14
Advertisement
Table of Contents
