AMX NCITE-813 Instruction Manual page 67

System Security Options (Cont.)
Option
Telnet/SSH/SSH FTP
Access
FTP Access
Online Certificate
Status Protocol
(OCSP)
Authenticate on
Server Ports
Restricted Switcher
Mode - DXLink
Network/Logo FTP
Authenticate AMX
Devices On ICSLAN
Ports
ICSLAN AMX Device
Connection
AMX Device
Connection
Secure AMX Device
Connection
Legacy ICSP
Encryption
Authenticate AMX
Devices On LAN Ports
LAN AMX Device
Connection
AMX Device
Connection
Secure AMX Device
Connection
Legacy ICSP
Encryption
Instruction Manual - Incite Digital Video Presentation Systems
Description
Select to enable Telnet, SSH, and SSH FTP access to the Master.
Telnet: The port value used for Telnet communication to the target Master. Enabling this feature allows future communica-
tion with the Master via a separate Telnet application.
• The default port value for Telnet is 23.
• Refer to the NetLinx Security with a Terminal Connection section for more information on the related procedures.
SSH: The port value used for secure Telnet communication. A separate secure SSH Client would handle communication
over this port. When using a secure SSH login, the entire login session (including the transmission of passwords) is en-
crypted; therefore it is secure method of preventing an external user from collecting passwords.
• SSH version 2 is supported.
• The default port value is 22.
NOTE: If this port?s value is changed, make sure to use it within the Address field of the SSH Client application.
Select to enable FTP access to the Master. The default port value used for FTP communication is 21.
NOTE: This port can be disabled/enabled, but its value cannot be changed.
Select to enable usage of the OCSP to validate received certificates before trusting the sending site.
Select to require user name and password authentication on Telnet, Program, and HTTP/HTTPS ports. Authentication is
always required on FTP/SFTP and SSH ports.
NOTE:
If Authenticate on Server Ports is disabled but LDAP is enabled, a login is still required. If you do not desire a login,
LDAP must also be disabled.
Select to enable or disable the Switcher Secure Mode on DVX and DGX platforms. During Switcher Secure Mode, the
switcher (5002 device) does not allow packet routing between the LAN connector and any DXLink endpoints.
Additionally, the switcher disables any open IP ports on the LAN (e.g. Telnet or FTP servers.)
Select to require user name and password authentication on devices connected to the ICSLAN ports on the Master.
Select to allow ICSP access to the Master for Device-type users connected to the ICSLAN ports. Expand the ICSLAN
AMX Device Connection section to view this option.
Select to enable connection to AMX devices from the Master. Expand the ICSLAN AMX Device Connection section to view
this option.
Select to enable secure connection to AMX devices from the Master. Expand the ICSLAN AMX Device Connection section
to view this option.
Select to enable encryption on the legacy ICSP ports on the Master. Expand the ICSLAN AMX Device Connection section
to view this option.
Select to require user name and password authentication on devices connected to the LAN ports on the Master.
Select to allow ICSP access to the Master for Device-type users connected to the LAN ports. Expand the LAN AMX
Device Connection section to view this option.
Select to enable connection to AMX devices from the Master. Expand the LAN AMX Device Connection section to view this
option.
Select to enable secure connection to AMX devices from the Master. Expand the LAN AMX Device Connection section to
view this option.
Select to enable encryption on the legacy ICSP ports on the Master. Expand the LAN AMX Device Connection section to
view this option.
WebConsole - Security Options
67