AMX NCITE-813 Instruction Manual page 125

Audio SEND_COMMANDs (Cont.)
XPOINT
VIDEO SEND_COMMANDs
The following table lists the video SEND_COMMANDs available for the NCITE-813AC:
Video SEND_COMMANDs
CI<input>O<output>
VI<input>O<output>
?VIDIN_EDID
VIDIN_EDID
?VIDIN_EDID_AUTO
Instruction Manual - Incite Digital Video Presentation Systems
Sets the mix level that the audio input addressed by the parameter <input> provides to the audio
output <output> to <value>.
Note: Audio input ports 1..10 share a setting across them for a specific output mixer's value.
Syntax:
SEND_COMMAND <DEV>, "'XPOINT-<value>,<input>,<output>'"
Variables:
value = -100..0
input = 1, 2, 3 where 1=Selected audio input, 2=Mic1, and 3=Mic2
output = 1..4 where 1 is for the AMP output and 2, 3, and 4 are for the LINEOUT 2-4 outputs.
Example:
SEND_COMMAND AUDIO_OUTPUT_2,"'XPOINT--75,LINE,2'"
Sets the mix level of the selected input's contribution to the audio LINEOUT (2) output to -75.
Switches both the audio and video input to the output port.
Syntax:
SEND_COMMAND <DEV>, "'CI<input>O<output>'"
Variables:
input = The source input port number.
output = The output port number to switch to.
Examples:
SEND_COMMAND SWITCHER,"'CI2O1'"
Switch (audio/video) input port #2 to output #1.
SEND_COMMAND SWITCHER,"'CI4O2'"
Switch input to one or more outputs for switcher level Video. Set <input> to 0 for disconnect.
NOTE:
Port 7 is for digital signals and port 8 is for analog signals.
Syntax:
SEND_COMMAND <DEV>, "'VI<input>O<output>'"
Variables:
input = The source video input port number.
output = The video output port number to switch to.
Example:
SEND_COMMAND SWITCHER,"'VI2O1'"
Switch video input port #2 to video output #1.
Requests the EDID source being mirrored by the video port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_EDID'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_EDID'"
Returns a COMMAND string of the form:
VIDIN_EDID-<source>
See the VIDIN_EDID command for the list of potential sources.
Sets the EDID source to mirror in video input port addressed by D:P:S.
Syntax:
SEND_COMMAND <DEV>,"'VIDIN_EDID-<source>'"
Variables:
source = 4K, 4K60, All Resolutions, Wide-screen, Full-screen, Mirror Out 1, Mirror Out 2, Mirror Out 3
Example:
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_EDID-MIRROR OUT 2'"
Requests whether the EDID source for the video input updates the available list of resolutions at
regular intervals.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_EDID_AUTO'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_EDID_AUTO'"
Returns a COMMAND string of the form:
VIDIN_EDID_AUTO-<status>
Programming
125