AMX NCITE-813 Instruction Manual page 130

Video SEND_COMMANDs (Cont.)
?VIDOUT_OSD
VIDOUT_OSD
?VIDOUT_OSD_COLOR
VIDOUT_OSD_COLOR
?VIDOUT_OSD_POS
VIDOUT_OSD_POS
?VIDOUT_RES_REF
Instruction Manual - Incite Digital Video Presentation Systems
Requests whether the video output ports have the OSD setting enabled or disabled.
Syntax:
SEND_COMMAND <DEV>, "'?VIDOUT_OSD'"
Example:
SEND_COMMAND VIDEO_OUTPUT_1,"'? VIDOUT_OSD'"
Returns a COMMAND string of the form:
VIDOUT_OSD-<ENABLE|DISABLE>
Enables or Disables the On Screen Display (OSD) setting on the video output ports. If enabled, then
the OSD setting is on. If disabled, then the OSD setting is off.
Syntax:
SEND_COMMAND <DEV>," VIDOUT_'OSD-<ENABLE|DISABLE>'"
Example:
SEND_COMMAND VIDEO_OUTPUT_1,"' VIDOUT_OSD-ENABLE'"
Requests the On Screen Display (OSD) color on the display connected to the video port addressed
by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'? VIDOUT_OSD_COLOR'"
Example:
SEND_COMMAND VIDEO_OUTPUT_1,"'? VIDOUT_OSD_COLOR'"
Returns a COMMAND string of the form:
VIDOUT_OSD_COLOR-<color>
Determines the On Screen Display (OSD) color scheme on the display connected to the video port
addressed by the D:P:S.
Variables: color = black, blue, white, yellow
Schemes:
Options Background
Black Black
Blue Blue
White White
Yellow Yellow
Syntax:
SEND_COMMAND <DEV>,"'VIDOUT_OSD_COLOR-<color>'"
Example:
SEND_COMMAND VIDEO_OUTPUT_1,"'VIDOUT_OSD_COLOR-BLACK'"
Requests the On Screen Display (OSD) position on the display connected to the video port ad-
dressed by the
D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?VIDOUT_OSD_POS'"
Example:
SEND_COMMAND VIDEO_OUTPUT_1,"'?VIDOUT_OSD_POS'"
Returns a COMMAND string of the form:
VIDOUT_OSD_POS-<position>
Determines the On Screen Display (OSD) position on the display connected to the video port ad-
dressed by the
D:P:S.
Variables:
position = TOP LEFT, TOP RIGHT, BTM RIGHT, BTM LEFT
Syntax:
SEND_COMMAND <DEV>,"'VIDOUT_OSD_POS-<position>'"
Example:
SEND_COMMAND VIDEO_OUTPUT_1,"' VIDOUT_OSD_POS-TOP LEFT"
Requests the resolution and refresh rate of the video output ports.
Syntax:
SEND_COMMAND <DEV>, "'?VIDOUT_RES_REF'"
Example:
SEND_COMMAND VIDEO_OUTPUT_1,"'?VIDOUT_RES_REF'"
Returns a COMMAND string of the form:
VIDOUT_RES_REF-<h>x<v>,<rate>
Font
White
Yellow
Black
Blue
Programming
130