AMX NCITE-813 Instruction Manual page 49

Video Settings Options (Cont.)
General Setup
OSD
Enable OSD
OSD Color
Allow Display
Sleep
Display Sleep
Delay
OSD Position
Video Mute
Video Freeze
Video Transition
Blank Color/Logo
LOCAL HDMI OUTPUT A-B/DXLite OUTPUT C
The following options appear for all three of these outputs unless specified otherwise.
Port
H ACTIVE
V ACTIVE
Color Space
Color Depth
VIC
Pixel Clock
Source Channel
DXLite Quality
WINDOWS:
Windows Settings
Window Position
Window Size
Left/Large Input
Right/Small Input
Instruction Manual - Incite Digital Video Presentation Systems
Press the right navigational button to access the options for OSD, Video Transition, and Blank/Color Logo.
Press the right navigational button to access the options for OSD.
Use the left and right navigational buttons to toggle whether you want the On-Screen Display (OSD) overlay to be turned
on or off.
You can choose from Enabled or Disabled. When enabled, the input name and resolution displays in a small box in the
upper left-hand corner of the screen whenever you select a new input source.
The location of the input name and resolution can be changed using the OSD Position option. The default setting is
Disabled.
NOTE:
The OSD may appear pixelated when downscaling video at lesser resolutions.
Use the left and right navigational buttons to select the background color for the on-screen display. You can choose from
Black, White, Yellow, or Blue. The default setting is Black.
Use the left and right navigational buttons to enable or disable sleep delay on the selected video output.
Use the left and right navigational buttons to set the sleep delay for the OSD.
Use the left and right navigational buttons to select the on-screen display's relative position so it is unobtrusive to video.
You can choose from Top Left, Top Right, Bottom Left, and Bottom Right. The default setting is Top Left.
Use the left and right navigational buttons to mute/un-mute (enable/disable) all video output displays. Video mute results
in a blank screen on the output displays.
Use the left and right navigational buttons to toggle whether you want the current image to freeze and remain on the
screen. You can choose from Enable or Disable. The default setting is Disable.
Use the left and right navigational buttons to select a transition between the previously selected video input and the cur-
rently selected video input. You can choose from Diag Top Left, Diag Top Right, Diag Bottom Left, Diag Bottom Right,
Horiz From Left, Horiz From Right, Vert From Top, Vert From Bottom, and Fade.
Use the left and right navigational buttons to choose a blanking screen. You can choose from Blue, Black, or an uploaded
Logo.
NOTE: If you have uploaded a logo to display on the output, you can also select the logo from this option. Logo images
must be 24-bit color bitmap files at least 36x36 pixels in size.
This option lists the output port currently being used. This option is view-only.
This option lists the horizontal active pixels on the video output. This option is view-only.
This option lists the vertical active pixels on the video output. This option is view-only.
This option lists the color space on the video output. This option is view-only.
This option lists the color depth on the video output. This option is view-only.
This option lists the VIC on the video output. This option is view-only.
This option lists the pixel clock on the video output. This option is view-only.
This option lists the video input currently sending video to the video output. This option is view-only.
This option lists the degree or lack of quality in the video output. This option is only available on DXLite Output C and is
view-only.
Press the right navigational button to view the settings for Window Position, Window Size, Left/Large Input, and Right/
Small
Input.
Use the left and right navigational buttons to choose a window position for the windows when the View Mode is set to
Windows. You can choose from Side By Side and Top Bottom.
Use the left and right navigational buttons to choose a window size for the windows when the View Mode is set to
Windows. You can choose from Top Large and Bottom Large.
Use the left and right navigational buttons to choose a video input for the left window when the View Mode is set to
Windows.
Use the left and right navigational buttons to choose a video input for the right window when the View Mode is set to
Windows.
Audio/Video Configuration
49