AMX NCITE-813 Instruction Manual page 126

Video SEND_COMMANDs (Cont.)
VIDIN_EDID_AUTO
?VIDIN_FORMAT
?VIDIN_HDCP
VIDIN_HDCP
?VIDIN_HSHIFT
VIDIN_HSHIFT
?VIDIN_NAME
Instruction Manual - Incite Digital Video Presentation Systems
Sets whether you want the EDID source for the video input to update the list of available resolutions
at regular intervals.
Syntax:
SEND_COMMAND <DEV>,"'VIDIN_EDID_AUTO-<ENABLE|DISABLE>'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_EDID_AUTO-ENABLE'"
Requests the input format of the video port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_FORMAT'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_FORMAT'"
Returns a COMMAND string of the form:
VIDIN_FORMAT-<format>
Queries the video input HDCP compliance setting of the video input port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>,"'?VIDIN_HDCP'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_HDCP'"
Returns a string of the form:
VIDIN_STATUS-<ENABLE|DISABLE>
Sets the video input HDCP compliance setting of the video input port addressed by the D:P:S. When
VIDIN_HDCP is disabled, the addressed video input will appear to any source as not being HDCP
compliant. For computer sources that encrypt all video when connected to an HDCP-compliant dis-
play, disabling HDCP compliance on the input will cause the computer to send non-encrypted video
which can then be routed to non-compliant displays and video conferencing systems.
This command is not available for DXLink input ports.
NOTE:
It may be necessary to disconnect and re-connect PC sources after changing this setting.
CAUTION: Disabling HDCP compliance for sources that do not support non-compliant displays
(such as DVD and Blu-Ray players) is not recommended and may affect NCITE performance.
Syntax:
SEND_COMMAND <DEV>, "'VIDIN_HDCP-<option>'"
Variables:
option = ENABLE, DISABLE (default = ENABLE)
Example:
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_HDCP-ENABLE'"
Enables the HDCP compliance of video input port (#1 based on D:P:S).
Requests the input Horizontal shift of the VGA video port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_HSHIFT'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_HSHIFT'"
Returns a COMMAND string of the form:
VIDIN_HSHIFT-<value>
Sets the horizontal shift of the video port addressed by the D:P:S to <value>.
Syntax:
SEND_COMMAND <DEV>, "'VIDIN_HSHIFT-<value>'"
Variables:
value = -50..50
Example:
SEND_COMMAND "'VIDIN_HSHIFT-2'"
Sets the Horizontal shifting of VGA video input port (#1 based on D:P:S) to 2 (shift to right).
SEND_COMMAND "'VIDIN_HSHIFT--3'"
Sets the horizontal shifting of VGA video input port (#1 based on D:P:S) to -3 (shift to left).
Requests the input name of the video port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_NAME'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_NAME'"
Returns a COMMAND string of the form:
VIDIN_NAME-<name>
Programming
126