Table of Contents
Advertisement
Answering system
Answering system settings
Use the answering system menu of a handset to set up the announcement
message, turn on or off the answering system or message alert tone, activate
call screening, or change the number of rings, remote access code or message
recording time.
Announcement
Your outgoing announcement plays when calls are answered
by the answering system.
The telephone has a default outgoing announcement, "Hello,
please leave a message after the tone." You can use this
announcement, or record your own.
To record a new outgoing announcement:
MENU/
1. Press
2. Press
or
CID
/SELECT
MENU
/SELECT
3. Press
MENU
4. The screen displays Play [2] Del [3] Rec [7] and it
announces, "To play, press 2. To record, press 7." Press 7 to
record. The handset announces, "Record after the tone.
Press 5 when you are done."
5. After the tone, speak towards the handset microphone.
Press 5 to end recording. The newly recorded
announcement automatically plays.
To listen to the recorded announcement again, wait after
playback has completed, then press 2.
in idle mode.
SELECT
to scroll to Answering sys, then press
DIR
.
to select Announcement.
102
Answering sys
ECO
Announcement
ECO
Play
Del
Rec
[2]
[3]
[7]
ECO
Recording... Stop
[5]
ECO
Advertisement
Table of Contents
