Message Alert Tone - AT&T DL72119 Complete User's Manual

Answering system
Answering system settings

Message alert tone

When the message alert tone is set to On, and there is at least one new
message, the telephone base beeps every 10 seconds. The tone stops when all
new messages have been reviewed. By default, the message alert tone is Off.
To turn on or off the message alert tone:
MENU/
1. Press
2. Press or
CID
/SELECT
MENU
3. Press or
CID
/SELECT
MENU
4. Press or
CID
/SELECT
MENU
5. Press or
CID
/SELECT.
MENU
Notes:
To temporarily turn off the message alert tone, see page 113.
f
The message alert tone beeps only if all the following conditions are met.
f
–
Answering system is on.
–
Message alert tone setting is on.
–
There are new messages.
in idle mode.
SELECT
to highlight Answering sys, then press
DIR
.
to highlight Ans sys setup, then press
DIR
.
to highlight Msg alert tone, then press
DIR
.
to choose On or Off, then press
DIR
109
Msg alert tone
ECO
Off
ECO