Table of Contents
Advertisement
Multiple handset use
Intercom
Use the intercom feature for conversations between two devices.
You can buy additional expansion handsets (AT&T model DL70019, sold
separately), cordless headsets and speakerphones for this telephone system.
You can register up to five handsets or cordless headsets/speakerphones to
the telephone base.
Initiate an intercom call
1. Press MENU/
2. Press
or
CID
/SELECT .
MENU
3. The screen displays Intercom to:. Use the dialing keys to
enter a device number (1-5). The handset shows Calling
HS X. The destination handset rings and shows HS X is
calling.
To answer an intercom call:
HOME/
Press
f
dialing key (0-9, TONE
handsets now show Intercom.
To end an intercom call:
OFF/
Press
f
telephone base or charger.
Notes:
For cordless headsets and speakerphones, refer to the corresponding user's manual on how to answer and end an
f
intercom call.
You can cancel the intercom call before it is answered by pressing
f
If you are calling all handsets, only the first handset to pick up can answer the intercom call.
f
If the destination device does not answer the intercom call within 100 seconds, or if the device is in use, on a call, or
f
out of range, the initiating device displays Unable to call and returns to idle mode.
To temporarily silence the intercom ringer, press
f
headset.
You can only use one pair of devices at a time to make intercom calls.
f
on the handset in idle mode.
SELECT
to highlight Intercom, then press
DIR
/CELL, /SPEAKER, or any
,
FLASH
or QUIET#) on the handset. Both
or place the handset back in the
CANCEL
OFF/
CANCEL
OFF/CANCEL or MUTE/
53
Intercom to:
ECO
10:30
PM
Calling HS X
ECO
10:30
PM
Intercom
ECO
10:30
PM
on the handset.
on the destination handset/
DELETE
11/20
11/20
11/20
Advertisement
Table of Contents
