Table of Contents
Advertisement
Answering system
About the answering system
Call screening
To screen calls at the telephone base:
If the answering system and call screening
are on, the announcement and the incoming
message broadcast at the telephone base
when a call is answered by the answering
system.
Options while a message is being recorded:
Press VOL
f
base to adjust the call
screening volume.
Press VOL
f
/PLAY/STOP to temporarily turn on the call screening if the call
Press
f
screening is set to off.
To screen calls at the cordless handset:
If the answering system is on and a call is being answered by the answering
system, the handset shows To screen call press [SELECT] at the same time.
Press
/SELECT
MENU
the caller's information. If you do not subscribe to caller ID service, the handset
shows Screening....
Options while a message is being recorded:
/VOLUME or
Press
CID
f
screening volume.
Press /SPEAKER to switch between speakerphone mode and handset
f
mode.
HOME/
Press
f
or VOL
on the telephone
or VOL to temporarily turn on or off the call screening.
to screen the call on your handset. The handset shows
DIR
to answer the call.
FLASH
/VOLUME on the handset to adjust the call
112
Advertisement
Table of Contents
