Add A Headset - AT&T DL72119 Complete User's Manual

Bluetooth
Bluetooth setup

Add a headset

Before you begin, make sure that your Bluetooth enabled headset is not
connected to any other Bluetooth device. Refer to your headset user's manual
to learn how to search for or add new Bluetooth devices.
To pair and connect a headset:
1. Press MENU/
2. Press or
CID
3. Press or
CID
The handset displays Search headset....
4. Set your headset to discoverable mode (refer to the user's manual of your
headset). When the screen displays the found devices, press
highlight your headset, if necessary, then press
Enter the PIN of your headset, if required. The PIN for most Bluetooth
f
devices is 0000 (refer to the user's manual of your headset). Press
/SELECT to continue.
MENU
If you have trouble pairing your headset, it may not be compatible
with your DL72119/DL72219/DL72319/DL72419/DL72519. Check the
Bluetooth compatibility list at
https:/telephones.att.com/bluetooth
Notes:
The pairing process may take up to one minute. If the pairing process fails, try again.
f
When a connected headset is charging, it may disconnect from the telephone base and the CELL 2 light on the
f
telephone base turns off. For some headset models, you may need to turn on the headset and reconnect it to the
telephone base again.
on the handset in idle mode.
SELECT
to highlight Bluetooth, then press
DIR
to highlight Add BT headset, then press
DIR
MENU
.
21
/SELECT.
MENU
/SELECT.
MENU
or
CID
/SELECT.
to
DIR