Table of Contents
Advertisement
Answering system
Answering system settings
Number of rings
You can set the answering system to answer an incoming call after two, three,
four, five, or six rings. You can also select toll saver, which is explained below. By
default, the answering system answers an incoming call after four rings.
To set the number of rings:
1. Press
MENU/
2. Press
or
CID
/SELECT.
MENU
3. Press
or
CID
/SELECT.
MENU
4. Press
or
CID
/SELECT.
MENU
5. Press
or
CID
Toll saver - the answering system answers a call after
f
two rings when you have new messages, or after four rings when there is
no new message. This feature allows you to check for new messages and
avoid paying long distance charges when calling from out of your local
area.
6. Press
/SELECT
MENU
Note: If Smart call blocker is on, the first ring of all calls will be muted.
in idle mode.
SELECT
to highlight Answering sys, then press
DIR
to highlight Ans sys setup, then press
DIR
to highlight # of rings, then press
DIR
to choose from 6, 5, 4, 3, 2 or Toll saver.
DIR
to save.
107
# of rings
ECO
3
ECO
Advertisement
Table of Contents
