1 (800) 222-3111 1 (866) 288-4268 or call . In Canada, dial Please refer to the online DAL75011/DAL75021/DAL75111/DAL75121/ DAL75211/DAL75221/DAL75311/DAL75321/DAL75411/DAL75421 DECT 6.0 cordless telephone/answering system with BLUETOOTH® wireless technology Complete user’s manual for a full set of installation and operation instructions at https://telephones.att.com/manuals...
Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information Read and understand all instructions in the user’s manual.
Page 4
Important safety information CAUTIONS: Use only the power adapter provided with this product. To obtain a replacement, https://telephones.att.com visit our website at or call 1 (800) 222-3111 1 (866) 288-4268 . In Canada, dial Use only the supplied rechargeable batteries or replacement batteries (model BT262661).
Page 5
Important safety information The RBRC Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel- metal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center.
Page 6
Install Telephone base Notes: Plug one end of the telephone line cord into a telephone jack or a DSL filter. If you have DSL high-speed Internet service, a DSL filter (not included) is required. Charger Caution: Use only the power adapter(s) provided with this product.
Page 7
Install Battery Install the battery, as shown below. Charge your handset(s) before initial use. The battery is fully charged after 11 hours of continuous charging. The CHARGE light on the top of the handset is on during charging. Caution: Use only the supplied rechargeable battery or replacement battery (model BT262661).
Handset overview Handset CHARGE light Ì On when the handset is charging in the telephone base or charger. Press to make or answer a cell call. Ì CELL Ì During a call, press to answer an incoming cell call when you hear a call waiting alert. Press to make or answer a home call.
Page 9
Handset overview MUTE/ During a call, press to mute the microphone. Ì DELETE When the handset is ringing, press to mute the ringer Ì temporarily. While reviewing the redial list, phonebook, caller ID Ì log, block list, or the star name list, press to delete an individual entry.
Page 10
Handset / Telephone base overview CALL BLOCK/ When the telephone is ringing, press to block the Ì incoming home call or cell call. VOICE Ì When on a home call or cell call, press to block the call. While connected to one or two cell phones, press to Ì...
Telephone base overview Telephone base Message window Press to page all handsets. Ì FIND HS VOLUME When the telephone is idle, press to increase the Ì telephone base ringer volume. During call screening or message playback, press Ì to increase the listening volume When the telephone is idle, press to decrease the Ì...
Page 12
Telephone base overview CELL 1 Light on when the telephone base is paired and Ì connected with a Bluetooth device. Light flashes when the telephone base is in Ì discoverable mode. Ì Press to connect the paired cell Bluetooth device. Press and hold to add or replace a Bluetooth Ì...
Initial basic settings After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. To skip setting the date and time, OFF/CANCEL on the handset. press Voice guide to set Smart call blocker and answering system After the date and time setting is done or skipped, the handset will prompt if you want to set Smart call blocker.
Page 14
Add a Bluetooth cell phone/headset ® Note: Your DAL75011/DAL75021/DAL75111/DAL75121/DAL75211/DAL75221/DAL75311/ DAL75321/DAL75411/DAL75421 is compatible with Bluetooth version 2.0 or above devices. To use a Bluetooth enabled cellular phone or headset with your telephone, you must first pair and connect your Bluetooth cellular phone or headset with the telephone base.
Initial basic settings Record your own announcement Your outgoing announcement plays when calls are answered by the answering system. You can use the preset announcement to answer calls, or replace it with your own recorded announcement. Using a cordless handset: 1.
Initial basic settings LCD language Using a cordless handset: 1. MENU -> -> Settings -> SELECT. SELECT again to select LCD language. to choose English, Français or Español -> SELECT. Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without going through the French or Spanish menus.
Page 17
3. Edit the telephone number if needed -> SELECT . Download a cell phone phonebook To download a cell phone phonebook using a cordless handset: Before downloading a phonebook, make sure the cell phone is paired, active, and connected to your DAL75011/DAL75021/DAL75111/DAL75121/DAL75211/ DAL75221/DAL75311/DAL75321/DAL75411/DAL75421. MENU -> -> Bluetooth ->...
Connect to Cell™ application (consists of Caller ID manager and Alerts manager) using the Google Play® Store app to extend the flexibility of your DAL75011/DAL75021/ DAL75111/DAL75121/DAL75211/DAL75221/DAL75311/DAL75321/ DAL75411/DAL75421. Scan the QR code on the right to download the application.
Page 19
® Bluetooth To activate remote voice control: 1. Press VOICE. -OR- If you have two connected cell phones -> to select a device. 2. When the handset plays the confirmation tone, speak toward the handset, and then wait for feedback. Make reply to the voice app’s feedback, if necessary. 3.
Smart call blocker * § If you have subscribed to caller ID service, then you can use the Smart call blocker feature to screen incoming calls. Not familiar with Smart call blocker? Want to know more? Smart call blocker is an effective call screening tool, which allows your phone system to screen ALL home calls.
Page 21
Smart call blocker Overview Unknown callers Family and friends Schools and pharmacies Robocalls and telemarketers Smart call blocker Search and screen based on caller ID Welcome calls Unwelcome calls Unknown calls (for home calls only) Robocalls and telemarketing Family and friends with calls: numbers: 1.
Smart call blocker Set up Phonebook Enter and save telephone numbers of frequently called businesses, family members and friends, so that when they call, your telephone rings without having to go through the screening process. Add contact to phonebook 1. MENU -> ->...
Page 23
Smart call blocker Star name list ^ Add caller names to your star name list to allow their calls to get through to you without having to go through the screening process. Add a star name list entry 1. CALL BLOCK -> ->...
Page 24
Smart call blocker Scenarios of Smart call blocker configuration Scenarios Voice guide setup Set profile Press 1 when Screen unknown I want to screen any home calls from numbers not saved prompted in the Phonebook, Allow list or Screen unknown Star name list.
Page 25
Smart call blocker Set Smart call blocker via voice guide After installing your phone or power resume after outage, the voice guide will provide you a quick and easy to set Date and Time, to configure Smart call blocker, and to set up Answering system. After the date and time setting is done or skipped, the base will prompt if you want to set Smart call blocker.
Page 26
Smart call blocker Screen all calls except welcome calls (1) Call from John “John” Telephone ringing Ask caller to No caller ID announce his or Ask you to select her name, then Uncategorized press # Answer call calls Answer call and save the number to the Allow list Block To answering system...
Page 27
Smart call blocker Block calls on the block list only (2) - Default settings In your block list Call rejected Robocalls Telemarketers Search and No caller ID Smart screen based on call blocker caller ID Uncategorized calls Telephone ringing Caller 1.
Page 28
Smart call blocker Forward all unknown calls to answering system (4) No caller ID Uncategorized calls Caller Call forwarded to Search and Smart answering system screen based on call blocker caller ID 1. Press CALL BLOCK. to choose Set profile ->SELECT. to select UnknownToAns.S ->SELECT.
Page 29
Smart call blocker Add numbers from caller ID log to allow list, block list and star name list Adding CID log CID -> -> SELECT to select the desired entry. entry to allow list -> To Allow list. 3. Edit the telephone number if needed -> SELECT . 4.
Answering system About answering system and voicemail Your telephone has separate indicators for two different types of voice messages: those left on the built-in answering system and those left at your telephone service provider’s voicemail. To listen to messages recorded on the built-in answering system, refer to the Message playback section;...
Answering system Turn answering system on or off The answering system must be turned on to answer and record messages. Using a cordless handset: MENU -> -> Answering sys -> SELECT. -> Answer on/off -> SELECT. to choose On or Off-> SELECT. When the answering system is on, the handset shows ANS ON.
Answering system Message playback Using the telephone base: Press when the telephone base is in idle mode. Ì Using a cordless handset: Press MENU then SELECT when the handset is in idle mode. Ì Options during playback Feature On the telephone base On a handset Adjust playback to Press VOLUME...
For C-UL compliance In compliance with the bilingual requirements for safety, caution, and warning markings of Canadian Federal and Provincial/Territorial statutes and regulations, the French version of Important safety information is included. Mesures de sécurité importantes Ce symbole vous alertera d’informations importantes ou d’instructions d’entretien pouvant apparaître dans ce guide d’utilisation.
Page 34
For C-UL compliance Si le produit ne fonctionne pas correctement, consultez la section Dépannage (Troubleshooting) du guide d’utilisation. Si vous ne pouvez pas régler le problème, ou si le produit est endommagé, consultez la section Garantie limitée (Limited warranty) des pages 37-39. N’ouvrez pas ce produit, sauf tel qu’indiqué...
Page 35
For C-UL compliance Spécifiquement en rapport avec les téléphones sans fil Confidentialité : Les mêmes caractéristiques qui rendent les téléphones sans fil si pratiques créent également des restrictions. Les appels téléphoniques sont transmis entre le socle du téléphone et le combiné par le biais d’ondes radio, et il se peut que vos conversations téléphoniques soient interceptées par d’autres équipements de réception d’ondes radio au sein de la portée du téléphone sans fil.
Page 36
For C-UL compliance Mesures préventives pour les utilisateurs de stimulateurs cardiaques implantés dans l’organisme Stimulateurs cardiaques (ne s’applique qu’aux téléphones sans fil numériques) : L’organisme ‘Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a mené une évaluation pluridisciplinaire des interférences entre les téléphones sans fil portatifs et les stimulateurs cardiaques implantés dans l’organisme.
FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX.
Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone.
Page 40
3. How long is the limited warranty period? The limited warranty period for SynJ® and Syn248® products is TWO (2) YEARS from the date of purchase, while all other products limited warranty period is ONE (1) YEAR from the date of purchase. If we replace a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to replacement Products for a period of either (a) 90 days from the date the replacement Product is shipped to you or (b) the time remaining on the...
Page 41
2. Include “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and 3. Provide your name, complete and correct mailing address and telephone number. 7. Other limitations This warranty is the complete and exclusive agreement between you and Advanced American Telephones.
Technical specifications RF frequency band 1921.536MHz — 1928.448MHz Channels Telephone base voltage 96 — 129 Vrms (AC voltage, 60Hz) Telephone base voltage 6VDC @400mA (DC adapter output) Handset voltage 2 x 1.2 VDC, AAA x 2, Ni-MH Charger voltage 6VDC @400mA (AC adapter output) Operating times* Talk time (handset): up to 10 hours...
Need help?
Do you have a question about the DAL75011 and is the answer not in the manual?
Questions and answers