Answering system
Message window displays
The message window on the telephone base displays the total number of
messages. See the following table for other message window displays.
0
0
(flashing)
1-99
1-99
(flashing)
1-99 and F
(alternating)
--
0-6
1-8
There are no messages in the answering system.
After a power failure, the number in the message window flashes to
indicate that the date and time need to be set.
Total number of messages and memos.
X
Current message number during old message playback.
X
Total number of new messages and memos. The number flashes when
X
there are new messages that have not been reviewed.
Current message number during new message playback.
X
After a power failure, the number in the message window flashes to
X
indicate that the date and time need to be set.
Memory is full. Messages must be deleted before new messages can be
recorded.
The answering system is being programmed by a system handset.
X
The answering system is answering a call or recording a memo or
X
announcement.
The answering system is being accessed remotely.
X
The directory or caller ID log is being accessed by a system handset.
X
Telephone base ringer volume while adjusting.
Speaker volume level of the telephone base while adjusting.
118