Table of Contents
Advertisement
Telephone settings
Handset settings
Set date and time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. However, the year must be correct so
that the day of the week can be calculated from the caller ID information.
After handset registration or a power failure, the handset will prompt you to set
the date and time.
To set the date and time manually:
1. Press MENU/
2. Press
or
CID
press
/SELECT.
MENU
3. Enter the month using the dialing keys.
4. Enter the day using the dialing keys.
5. Enter the year using the dialing keys, then press
/SELECT to move on to set the time.
MENU
6. Enter the hour using the dialing keys.
7. Enter the minute using the dialing keys.
8. Press
or
CID
/SELECT to confirm.
MENU
Note: If the date and time are not set when a message is recorded, the system
announces, "Time and day not set," before each message plays.
in idle mode.
SELECT
to highlight Set date/time, then
DIR
to highlight AM or PM, then press
DIR
33
Set date/time
ECO
Date: MM/DD/YY
ECO
Time: HH:MM - -
ECO
Advertisement
Table of Contents
