Connecting The Sensor To Your Computer; Using The Sensor Digital Rc Desktop - Nomadio Sensor User Manual

Connecting the Sensor to your Computer

To connect your Sensor to your computer, do the following:
1. Plug the small end of the supplied adaptor cable into the receptacle on the left side of
the Sensor.
2. Plug the other end of the cable into an availab le USB port on your computer.
Your computer will recognize the Sensor as being connected via a new serial
communications port.

Using the Sensor Digital RC Desktop

To start the RC Desktop
To make changes to the
settings
To open a saved settings file
To save the current settings
into a file
To receive the current
settings from the Sensor
To send the RC Desktop's
current settings to the Sensor
To install the latest firmware
into the Sensor
To install firmware from a file
into the Sensor
To update the RC Desktop to
the latest version
From the STA RT menu, click (A ll) Programs, Nomadio Digital RC Desktop,
then Nomadio Digital RC Desktop.
Nav igate through the functions of the RC Desk top, and mak e changes as
appropriate to global settings, or to settings for indiv idual models.
From the File menu, click Open....
From the File menu, click Save.
1. Connect the Sensor to y our computer.
2. Turn on the Sensor.
3. From the File menu, click Receive Settings from Sensor.
1. Connect the Sensor to y our computer.
2. Turn on the Sensor.
3. From the File menu, click Send Settings to Sensor.
1. Connect the Sensor to y our computer.
2. Turn on the Sensor.
3. From the Firmware menu, click Install Latest Firmware.
1. Connect the Sensor to y our computer.
2. Turn on the Sensor.
3. From the Firmware menu, click Install Firmware from File.
From the Help menu, click Software Updates.
73