Nomadio Sensor User Manual page 48

Changing the Throttle Speed
Use the navigation controls to change the steering servo type as follows:
1. A ccess the top function menu
from the driv ing screen.
2. Nav igate to the Steering (Ch1)
menu.
3. Nav igate to Throttle Speed.
4. Change the v alues.
Interaction with other Settings
• Servo Speed is applied after Expo. The trigger levels refer to the curved input value.
• ABS is applied after Brake Speed, so Brake Speed can limit how quickly the brake input
moves to the ABS Active region, but once there ABS pulses happen at full speed.
• Servo Speed is applied after AutoStart, so if the AutoStart Level is set higher than the
Throttle Speed Trigger, the servo movement will be slowed.
• Idle Up only takes effect when the trigger is centered. Throttle Speed can slow down
the return to center, and therefore slow down Idle Up activation. Once Idle Up is
started, the servo will jump to the set position.
menu
or : then
or
Value
Throttle
Speed
or
Brak e
Speed
Throttle
Trigger
Brak e
Trigger
45
Description
The amount of limiting applied to serv o
throttle motion once the trigger amount has
been exceeded.
The amount of limiting applied to serv o brak e
motion once the trigger amount has been
exceeded.
The percentage of full throttle range that will
be limited.
The percentage of full brak ing range that will
be limited.