Nomadio Sensor User Manual page 46

Changing the Throttle Servo Reverse Setting
Use the navigation controls to change the throttle servo reverse setting as follows:
1. A ccess the top function menu from
the driv ing screen.
2. Nav igate to the Throttle (Ch2)
menu.
3. Nav igate to Servo Reverse.
4. Change the v alue.
Throttle Servo Type
Changing the Throttle Servo Type
Use the navigation controls to change the throttle servo type as follows:
1. A ccess the top function menu
from the driv ing screen.
2. Nav igate to the Throttle (Ch2)
menu.
3. Nav igate to Servo Type.
4. Change the v alue.
menu
or : then
or
Value
Off
or
On
Throttle servo type lets you select the type of throttle
servo (analog or digital) in the vehicle. Analog servos
are sent signals at 50 frames/sec, while Digital servos
are sent signals at 100 frames/sec.
If you are running an electric car wi t h an ESC, i t may
perform better with the digital setting. Some ESCs may
not operate at all with the higher frame rate. Try both
settings and choose the best performance.
menu
or : then
or
Value
A nalog
or
Digital
43
Description
Standard serv o direction.
Rev ersed servo direction.
Description
Throttle serv o is analog.
Throttle serv o is digital.