Select Ruler Style - IBM 3197 C User Manual

Select Ruler Style
- - - - c - - - - - - - - - - - - - - - - -
1. Press the SetUp key. A diamond (.» and the current ruler style (vertical,
horizontal, or cross-hair) appear on the operating status line.
l ___
<>
- - - - t - - - + - )
L
Ruler Style
(I. -
or +)
2. Press and release the Cmd 2 key until the desired ruler style appears on the
operating status line. The ruler style will be changed from vertical (I),
horizontal (-) to cross-hair (+).
Note: To enable the ruler function, you have to press the Rule key.
3. Press the SetUp key. The diamond disappears as you exit from setup mode.
Once selected, the ruler style will be stored and will not be reset when the
display station power switch is set to 0 (off).
3-16
IBM 3197 User's Guide
- - -
-~-- ~--~~