IBM 3197 C User Manual page 159

Color display station
Table of Contents

Advertisement

Error
Cause
Recovery Action
Code
0026
You pressed the Field - key to exit a
Press the Reset key.
numeric-only field, but the last position of
Correct the last position of the field, or exit
the field was not a number 0 through 9.
the field by using the Field
+
or Field Exit
key.
0027
You pressed a key that is not used by this
Press the Reset key.
display station.
Continue by using valid keys.
0028
You pressed a key that is not used by this
Press the Reset key.
display station.
Continue by using valid keys.
0029
The second key pressed-during a
Press the Reset key.
diacritic-key function did not produce a
Enter a valid combination.
valid combination.
0040
The 'data set ready' line is inactive and it
Recovery from this error must be made at
should be active.
the 5294 Control Unit.
0042
The receive clock signal failed during a
Recovery from this error must be made at
receive operation.
the 5294 Control Unit.
0043
The 'data set ready' line is active and it
Recovery from this error must be made at
should be inactive.
the 5294 Control Unit.
0044
The 30-second communications time-out
Recovery from this error must be made at
has expired with no valid data being
the 5294 Control Unit.
received.
0050
Either the 'clear to send' line was inactive
Recovery from this error must be made at
while the 'request to send' line was active
the 5294 Control Unit.
or the 'clear to send' line was active while
the 'request to send' line was inactive.
-\
0051
The transmit clock signal failed during a
Recovery from this error must be made at
transmit operation.
the 5294 Control Unit.
0052
The 5294 Control Unit detected an internal
Recovery from this error must be made at
error.
the 5294 Control Unit.
0054
The 5294 Control Unit received an invalid
Recovery from this error must be made at
command from the system during
the 5294 Control Unit.
communications.
0097
An attempt was made to run online
Press the Reset key.
verification tests not supported by the host
Continue to use the display station without
program.
performing the verification tests.
A-4
IBM 3197
User's Guide
~-
..
-
..
- - - - - . - - - . - - - - -

Advertisement

Table of Contents
loading

Table of Contents