Table of Contents
Advertisement
3.
Exit from the offline printer setup mode and then enter the online printer
setup mode and specify the:
•
Character Pitch (Characters Per Inch)
•
Line Pitch (Lines Per Inch)
•
Print Quality.
Note: The above three function can be specified in offline printer setup
mode.
4.
Exit the online printer setup mode and return to the normal communication
mode. All of the selected settings will be stored and will not be reset when
the display station power switch is set to 0 (off).
Cancelling Printing Operation
To cancel the printing ofthe current print file, do the following steps.
1.
Enter the online printer setup mode.
2.
Press the Reset key while pressing and holding the Alt key. Then the
printing of current print file with be cancelled.
3.
Exit from the online printer setup mode and return to normal communication
mode.
Note: The printer continues printing data that were sent to the printer buffer
prior to your print cancel request.
Inquiring Printer Status
If the printer does not work or stops printing during a print operation, do the
following steps.
1.
Enter the online printer setup mode.
2.
Check printer setup mode symbol or error codes displayed on the operating
status line. If there is an error code, see Appendix A, "Error Codes and
Recovery Procedures." If there is a printer setup mode symbol, see the
"Symbols in Printer Setup Mode" in Chapter 1.
3.
Exit from the online printer setup mode and return to normal communication
mode.
5-36
IBM 3197 User's Guide
Advertisement
Table of Contents
