Table of Contents
Advertisement
Specifying Print Quality
1.
Locate the symbol for print quality on the operating status line .
•
Character Quality
2.
Press and hold the Shift key and then press the F18/F6 key. Each time you
press the F18/F6 key while holding down the Shift key, the print quality
selection symbol will change in the following order.
(Draft) (Near Letter) (System
Designated)
Note: When you select the 5256 device
10,
the system designated print
quality is not available.
3.
Press and hold the Alt key and then press the PrtSet (F13/F1) key to return
the display station to normal communication mode.
You have now completed all the necessary settings of
the printer setup mode functions.
Chapter 5. Using the IBM Enhanced Keyboard
5-43
Advertisement
Table of Contents
