(
Online Setup Functions
The online setup functions can be specified after pressing the SetUp key while
the display station is in normal communication mode. The functions available
are:
•
Select the ruler style
•
Select the auto display dim interval
•
Adjust the alarm volume
•
Adjust the clicker volume
•
Enable/disable the clicker action
•
Enable/disable the cursor blink
•
Select the cursor style
•
Enable/disable the extended display
•
Enable/disable the cursor locator
•
Turn-off the color mode (limit color).
Note: The above setup mode functions can also be specified in the offline setup
mode.
The following sections describe the procedures for specifying each online setup
mode.
Help for the user
For ease of use, each setup function is described in a separate
sub-section. However, when you need to setup two or more
setup functions at the same time, you can set them
successively in setup mode without turning power off and on
when following the setup procedure for each setup function.
Chapter 5. Using the IBM Enhanced Keyboard
5-15