(~
4.
Press and release the F20/F8 key while pressing and holding the Shift key.
The terminal mode symbol changes each time you press the F20/F8 key in
the following order.
. .
l ..... )···· .... ·1 ..... )
5.
Release both the F20/F8 key and the Shift key when the terminal mode
symbol you want to select, appears.
6.
Press and hold the Shift key and then press the SetUp key. The diamond
disappears as you exit from setup mode. Once selected, the terminal mode
will be stored and will not be reset when the display power switch is set to
o
(off).
7.
Press the Reset key to enter normal communication mode.
Chapter 5.
Using
the 102-key Keyboard
5-5