8. Select the operation Turn on UPS
a. Select Turn on UPS.
b. Press Enter to confirm the action.
c. Press Enter again.
9. Locate the front-left panel set aside or on top the UPS, and replace it on the UPS.
4.7 Remote Emergency Power-off (REPO)
The UPS is equipped with a remote emergency power-off (REPO) connector for normally-open (N.O.) or
normally-closed (N.C.) systems. See
To comply with national and local wiring codes and regulations, field-supplied interface with the external
REPO circuit is required to disconnect the UPS input-feed breaker and remove all sources of power to the
UPS and connected equipment.
4 Operating the UPS
REPO Connection
on page 27, for connection details.
47