Start-Up And Ups Mimic Screens; Main Menu - Vertiv Liebert EXS Installer/User Manual

3.3.1 Start-up and UPS Mimic Screens

At start-up, the UPS executes a system test and displays the Vertiv logo screen for 10 to 15 seconds,
shown in Figure 3.1 on page 31. After the test completes, an overview screen shows status information,
the active (green) power path, and the non-working power path (gray), see Figure 3.4 below.
Figure 3.4 UPS Mimic Screen

3.3.2 Main Menu

To access the main menu, press Enter while at the UPS Mimic screen. Use the Up/Down buttons to select
the submenu options, and press Enter to open the submenu. Press ESC to return to UPS Mimic.
Figure 3.5 Main Menu
Table 3.4 Menu Options
Submenu Description
Status Voltage, current, frequency, and parameters for UPS components, see
Settings Display and system parameter settings, see
Control UPS controls, see
Log Current alarms and event history, see
About Product and network information, see
Maintain Service-only, proprietary-password-protected page for use only by Vertiv service representatives.
34
Settings Submenu
Control Screen on page 36.
Log Screen on page 36.
About Page on page 37.
Status Screen on page 35.
on page 35.
Vertiv | Liebert® EXS™ Installer/User Guide