Table 3.1 Display-panel Button Functions and Descriptions (con-
tinued)
NOTE: While the UPS is operating, the LCD will dim and display a screen saver if there is no active alarm
or user interaction for two minutes, see Figure 3.2 below. If an alarm or fault occurs or if any button is
pressed, the UPS-flow screen displays.
Figure 3.2 LCD Screen Saver
3.1 LED Indicators
The LEDs on the front-panel display indicate operation and alarm statuses of the UPS.
32
Button
Function
Description
Escape
Go back.
Power
Power-on the UPS, power-off the UPS, transfer to Bypass Mode.
Table 3.2 LED Functions
Indicator
LED color
Run indicator
Green
Yellow
Alarm indicator
Red
N/A
LED state
Indicates:
On
UPS has output
Blinking
Inverter is starting
Off
UPS has no output
On
Alarm occurs
On
Fault occurs
Off
No alarm, no fault
Vertiv | Liebert® EXS™ Installer/User Guide