Equipment Handling And Unpacking - Vertiv Liebert EXS Installer/User Manual

2.2 Equipment Handling and Unpacking

Upon receipt, check the items received against the order and shipping manifest. If any parts are missing,
contact your local Vertiv representative or visit http://www.VertivCo.com/en-us/support/.
The UPS ships on a pallet and is equipped with casters that permit two or more people to roll it off the
pallet for installation. Move the palleted UPS as close as possible to the installation location before
removing packing material or loosening shipping brackets.
NOTICE
The casters on the UPS are for moving short distances. Move the pallet as close as possible to
the installation site before taking the UPS off the pallet. Plan the unloading procedure and
route to the final location to minimize the distance that the UPS must be rolled on casters and
to avoid large cracks and un-even flooring. Major shocks while moving the UPS over large
cracks can loosen internal connections and otherwise damage the unit.
WARNING! Risk of moving heavy unit. Can cause property damage, injury and death. Ensure
that any equipment that will be used to move the UPS has sufficient lifting capacity. Refer to
Table 7.2 on page 54, for weights. The UPS presents a tipping hazard. Do not tilt the UPS more
than 15 degrees from vertical. The UPS is fitted with casters, take care to prevent movement
when unbolting the equipment from its shipping pallet. Ensure adequate personnel and lifting
equipment are available when taking the UPS off its shipping pallet.
ADVERTISSEMENT : Le poids élevé de l'appareil peut entraîner des dommages matériels, des
blessures et même la mort. Veillez à ce que les équipements utilisés pour déplacer le système
EXS™ de Liebert® possèdent une capacité nominale suffisante. Reportez-vous au Tableau
Table 7.2 on page 54. Le système ASC présente un risque de renversement. N'inclinez pas le
système ASC à plus de 15 degrés de la verticale. Comme le système ASC est équipé de roulettes,
veillez à éviter les mouvements involontaires lorsque vous déboulonnez l'équipement de sa
palette d'expédition. Veillez à ce qu'un personnel approprié et un dispositif de levage soient
disponibles lorsque vous retirez le système ASC de la palette d'expédition.
During unpacking:
• Inspect the UPS for damage. If you find any problem, file a damage claim with the carrier
immediately and send a copy to Vertiv at:
Attn: Traffic Department
Vertiv Corporation
1050 Dearborn Drive
P.O. Box 29186
Columbus, Ohio 43085 USA
• Check the accessories and model numbers against the delivery list. If you find any problem,
notify your local Vertiv representative immediately.
2 Installation and Commissioning
21