Editing Display And Operation Settings - Vertiv Liebert EXS Installer/User Manual

About Page
The About screen offers tabs that list information about the product and the network.
To view the product and network information:
1. At the main menu, select the Settings icon, and press Enter.
2. Use the arrow buttons to move the cursor left/right and select a tab, then press Enter to
display the information for the selected tab.
Figure 3.10 About Screen Tabs

3.4 Editing Display and Operation Settings

You may adjust the display settings and UPS configuration via the LCD. Table 3.5 on page 39, describes
the settings. The display and operation settings are password projected. The default password is 111111
(six ones).
NOTE: We recommend that you change the password to protect your system and equipment and
record the new password and store it in an accessible location for later retrieval. See
Password on page 39.
To enter the password:
1. Press the up-arrow button to change the digit, then press the down-arrow button to move to
the next digit.
2. Repeat to select each digit, and press Enter to submit the password.
Figure 3.11 Password Prompt
3 Operation and Display Panel
Changing the
37