Fitting The Electric Modules - Festo CPX Electronic Manual

2. Fitting
2.2

Fitting the electric modules

Festo P.BE−CPX−SYS−EN en 0503b
Caution
Modules may be damaged if they are not handled
correctly.
Observe the regulations for handling electrostatically
·
sensitive components.
Discharge yourself electrostatically before fitting or re
·
moving components in order to protect the components
against discharges of static electricity.
By adding or removing modules you can adapt the CPX ter
minal to your requirements. The mechanical link between the
electric modules is made via tie rods in the sub−bases. The
length of the tie rod is determined by the possible number of
sub−bass or electric modules.
Dismantle the CPX terminal before you add or remove sub−
bases. If you are using the additional fastenings of type
CPX−BG−RW−... for fastening onto a wall, it may be necessary
to loosen fastenings (see also Fig. 2/14).
2−5