Festo CPX Electronic Manual page 201

C. General information on parametrizing
System parameters
Force mode
Tab. C/2: System parameter Force mode
Module parameters Settings
Force mode
Force state
Digital signal Digital signal
Analogue signal
Tab. C/3: Module parameters Force mode" and Force state"
Festo P.BE−CPX−SYS−EN en 0503b
By means of a system parameter, Force is enabled globally for
the CPX terminal or blocked.
Settings
Blocked
(presetting)
Enabled
The signal status can be determined channel−orientated
(output/valve/input) for each module (see following table).
Blocked
(presetting)
Force state
Rest signal (presetting)
Set signal
Analogue value
(0 = presetting)
Description
Force is blocked for the complete CPX terminal
Force is enabled for the complete CPX terminal
Description
Force is blocked for the channel
Accept the signal status defined by Force state
Reset input/output signal
Set input/output signal
Value of the analogue signal
C−13