Festo CPX Electronic Manual page 199

C. General information on parametrizing
Force
Module parameters
Force channel X
1
Status LED of the respective input
Fig. C/5: Influencing input signals
Festo P.BE−CPX−SYS−EN en 0503b
Influencing input signals
0 1
disable
enable
System parameters
Force mode
Input signal
Forcing of an input does not change the input signal and can
also not be observed on the corresponding situation LED. The
logical status of the input only changes internally and may be
effective programme technically.
Obtain further information on Idle mode, Fail safe and Forcing
from the following sections.
Input
disable
1
C−11