Contactless Card Reader (Rfid) - Infinite Peripherals Linea Pro 7 User Manual

Contactless Card Reader (RFID)

The Linea Pro 7 has a built-in RFID tag/card reader. The RFID reader incorporates several RFID format
depending on the model of your Linea Pro 7.
To Use the RFID Reader:
1. Activate the Linea Pro 7 by pressing either Scan Button.
2. Place the RFID tag/card over the receiver/transmitter as indicated by the RFID label. The data will
be sent from the Linea Pro 7 Tab contactless reader to the iOS Device.
Keep the face of the tag/card flat, with the receiver/transmitter as close as possible. Depending on
the type of RFID tags/cards being used, it may be necessary for tags/cards to make direct contact
with the surface where the RFID receiver/transmitter is located for proper reading and writing.
Linea Pro 7 User Manual
UM-00028 Version: A
Figure 13: RFID Reader
Page 19 of 30