Powering On Your Linea Pro 7; Dual Purpose Scan Buttons - Infinite Peripherals Linea Pro 7 User Manual

POWERING ON YOUR LINEA PRO 7

Dual Purpose Scan Buttons

The Linea Pro 7 has two Scan Buttons located on each side of the unit. Both Scan Buttons are set up
as a dual-purpose button that can both power on the unit and scan barcodes.
To Power on the Linea Pro 7:
1. With the Linea Pro 7 powered off, press one of the Scan Buttons until a single beep is sounded.
This indicates that the Linea Pro 7 is now ready for use.
2. Press either Scan Button a second time to activate the scanner for normal barcode scanning.
(Located on each side)
When the Linea Pro 7 is left idling for an extended period, the power is automatically turned off to
preserve the charge on the internal battery pack.
Linea Pro 7 User Manual
UM-00028 Version: A
Scan Button
Figure 9: Dual Purpose Scan Buttons
Page 14 of 30