Rotary Attachment Option - GCC Technologies LaserPro C180II User Manual

Relevant Buttons
F1 (Back)
F4 (Save)
/ Directional
/ Directional

7.7 Rotary Attachment Option

The rotary attachment option provides the C180II with the ability to engrave on cylindrical or spherical
objects. In addition to the standard X, Y, Z axis, the rotary attachment allows for a fourth axis which
rotates your object 360° to allow for engraving on cups, wine glasses, and even spherical objects.
Model
Maximum Length
Maximum Loading Weight
Minimum Inner Diameter (Small conical fixture)
Maximum Inner Diameter (Small conical fixture)
Minimum Inner Diameter (Large conical fixture)
Maximum Inner Diameter (Large conical fixture)
Maximum Outer Diameter
INSTALLATION:
1) Open the front panel of the LaserPro C180II, lower the working platform to the bottom
2) Turn off the power of the laser engraver
3) When placing the rotary attachment on the working table, the rotary attachment can only apply the
SmartGUARD Setting Page
Back to previous page
Save your current settings
Adjust the value for that selections
Adjust the value for that selections
Work Piece Limitations
125
Function
C180II
250 mm (9.8 inches)
3kg (6 lbs.)
12 mm (0.47 inches)
46 mm (1.8 inches)
50 mm (1.9 inches)
76 mm (2.9 inches)
176mm (6.9 inches)
232001840G(08)