GCC Technologies LaserPro C180II User Manual page 58

File Edit Raster Page
The File Edit Raster Page allows you to edit the raster power and speed settings, as well as
enable or disable SmartACT for the selected job. These settings correspond to the same settings
found on the LaserPro C180II driver. This page allows you to easily adjust these values to make
immediate adjustments while processing your loaded jobs, even when you have disconnected
your computer from the LaserPro C180II
• Raster Power: 0.0% - 100%
• Raster Speed: 0.1% - 100%
• SmartACT: YES / NO
Relevant Buttons
F1 (Back)
/ Directional
/ Directional
Start / Stop
Auto Focus
/ Manual Focus Buttons
58
File Edit Raster Page
Back to previous page
Scroll through your loaded jobs
Cycle through the available selections
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-
axis)
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<File Manage-
ment>from the menu
File Management Page
Select a job file and
press E nt e r
File Information Page
press F4
File Information Page
Select<Ra st e r Se tting >
from the menu
File Edit Raster Page
Function
232001840G(08)