GCC Technologies LaserPro C180II User Manual page 55

Link / DLink Page
The Link / DLink Page allows you to set, arrange, and remove loaded jobs to and from a job
queue for processing. Use the directional keys to cycle through your loaded jobs, then simply
press the <F2 (Link)> key to add a file to the job queue. The job queue will be set in a sequential
order based on the order you link the files. To remove a job from your job queue, press the <F4
(DLink)> key.
The first column field (before the file name) displays the job number. The sequence for your job
queue is displayed in the two columns to the right of your file names. The first column to the right
of your job file name displays the job number of the previous file in the job queue sequence. The
second column after the file name displays that job's next file in the job queue sequence. First
and last jobs in the job sequence you set will have a (---) in the first and second columns
respectively. So according to the image above, the job queue sequence has been set to be
processed in this order: 03:Marble.cdr
Relevant Buttons
F1 (Back)
F2 (Link)
F4 (DLink)
/ Directional
Start / Stop
Auto Focus
/ Manual Focus Buttons
01:Marble.cdr
Link / DLink Page
Back to previous page
Add the currently-selected job to the job queue
Remove the currently-selected job from the job queue
Scroll through the menu selections
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-axis)
55
Navigating to this page:
Main Work Page
Functions Page
File Management Page
Link / DLink Page
02:Marble.cdr.
Function
232001840G(08)
press F4
Select<File Manage-
ment>from the menu
press F2