GCC Technologies LaserPro C180II User Manual page 28

Step 1. Connect LAN cable to the LAN port of GCC laser engravers and turn on machine
Step 2. Navigate the control panel through <F4> Function
Wizard> IP Address.
Step 3. Go to Windows <Control Panel>
series printer to check printer properties.
Step 4. Go to <Ports> tab of printer properties, and select <Add Port>, and follow the instruction to enter
the TCP/IP information received from laser machine control panel in step 2.
<Machine Setting>
<Hardware and Sound>
<LAN Setup
<Printer>, and right click on Spirit
232001840G(06)