GCC Technologies LaserPro C180II User Manual page 74

Vector Mode Page
The Set Vector Mode Page allows you to adjust and balance vector mode's quality and speed
settings based on your specific job. Speedy Vector Mode offers the highest output speed,
sacrificing quality. Whereas Quality Vector Mode offers the highest quality, sacrificing output
speed. Keep in mind that speed and quality are usually at a tradeoff. The system's default is Fine
Vector mode, sacrificing some speed for higher quality. The LaserPro C180II default setting is
<Fine Vector>.
• Modes: Quality, Production, Speedy
[Slower speeds / higher quality -------------------- Faster speeds / lower quality]
Relevant Buttons
F1 (Back)
F4 (Save)
/ Directional
Start / Stop
Auto Focus
/ Manual Focus Buttons
74
Vector Mode Page
Back to previous page
Save your current settings
Cycle Set Vector Mode between QUALITY VECTOR/
FINEVECTOR/ COARSE VECTOR/ SPEEDY
VECTOR
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-axis)
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<Ma chin e
Se tting
Advanced Option Page
Select<Ve ctor
M od e >from the menu
Vector Mode Page
Function
232001840G(08)
>from the menu