GCC Technologies LaserPro C180II User Manual page 67

LAN Setup Wizard Page
The LAN Setup Wizard Page allows you to connect the laser machine with ethernet to transmit files
from computer to laser machine for processing jobs. When selecting the DHCP to <ON>, the
network is set tup to dynamic IP address, the IP address will automatically retrieve from network;
while DHCP <OFF> is to apply static IP address, and you need to further enter the IP address,
MASK, and GATE information. Using Left or Right directional keys under dynamic IP setting page to
scroll between different columns to enter the address, and use Up or Down keys to change the
numbers.
• DHCP: NO/ OFF
Please refer to Chapter 5.2.1 for ethernet connectivity setup in Windows driver.
67
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<Ma chin e
Se tting >from the menu
Machine Setting Page
Select<LAN setup
wizard> from the menu
LAN Setup Wizard Page
232001840G(08)