GCC Technologies LaserPro C180II User Manual page 84

After entering the filename and pressing <ok>, the Preview screen will be shown.
The output file can be previewed and an estimated working time of the job is also displayed.
File Function (Option Page):
The file function section allows you to manage various laser parameters. This section is useful when
performing repeat jobs on a variety of objects, allowing you to save your frequently used laser
parameters and load them in the future.
• History File: This section contains a list of the recent files you have recently created and worked.
• SAVE: This function will save current print driver parameter settings to a file under the specified
location on your computer. (Saved parameter setting files will be tagged with the C180II
extension)
• LOAD: This function allows you load a previously saved print driver parameters.
• ORIGINAL: This function will load the print driver's original factory parameter settings.
• SAVE TO DEFAULT: This function allows you to save your current print driver parameters as
the default startup settings.
• DELETE: This function will delete the file you select from the History File section. Please note
the delete function only removes the file from the history file section, it does not remove
the .GL file from your hard drive, if you wish to completely remove the file from your hard disk,
and you will
have to manually delete the file from your operating system.)
NOTE
If you are using Windows 2000 or above as your operating system, then make sure you log in
with an administrator or administrator-rights account in order to properly save laser parameter
settings.
84 232001840G(08)