GCC Technologies LaserPro C180II User Manual page 64

Carriage Free Page
The Carriage Lock Page allows you to set whether the laser carriage is to be locked or free. If the
Carriage Free setting is set to <YES>, then you will be able to manually move the laser carriage
along the X and Y axis by hand with the top door open. Whereas setting the Carriage Free to
<NO> will lock the laser carriage and movement or positioning can only be done by the control
panel.
• Carriage Free YES / NO
Relevant Buttons
F1 (Back)
F4 (Save)
Start / Stop
Auto Focus
/ Manual Focus Buttons
64
Carriage Free Page
Back to previous page
Save your current settings
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-
axis)
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<Machine
Setting>from the
Machine Setting Page
Select<Ca rri a g e
Lock >from the menu
Carriage Free Page
Function
232001840G(08)