Using the spot focus mode – Spot Focus
You can take a picture with the appropriate focus automatically for just the point you
want to focus on and with its focus fixed.
(1) Set the POWER switch to CAMERA or MEMORY/NETWORK (DCR-IP55 only).
(2) Press FN to display PAGE1.
(3) Press SPOT FOCUS. The SPOT FOCUS screen appears.
(4) Press the desired area in the frame on the LCD screen.
To return to FN
To return to the autofocus mode
When adjusting Spot Focus, the following modes do not work:
– PROGRAM AE
Focal distance information
It is not displayed on the screen.
The SPOT FOCUS indicator flashes on the LCD screen. When the focus of the point
you selected is adjusted, the 9 indicator appears.
OK to return to PAGE1.
AUTO in step 4. The display returns to PAGE1.
PAGE1 PAGE2 PAGE3 EXIT