Viewing The Recording On Tv - Sony DCR-PC110 Operating Instructions Manual

Viewing the recording on TV
Connect your camcorder to your TV with tile A/V connecting cable supplied with your
camcorder to watch tile playback pictm e on the TV screen. You can operate tile video
control buttons in tile same way as when you monitor playback pictures on tile LCD
screen. When monitoring the playback picture on the TV screen, we recommend that
you power your camcorder flora a wall outlet using the AC power adaptor (p. 13).
Refer to tile operating instructions of yore TV.
Open the jack cover. Connect your camcorder to tile TV using the A/V connecting cable
supplied with your camcorder. Then, set the TV/VCR selector on tlle TV to VCR.
VIDEO
AUDIONIDEO
:Signal flow
Yellow
White _
Red
IN
@ S VIDEO
® VIDEO
.%,°°,o
g
I
Connect your camcorder to tile LINE IN input on tile VCR by using tile A/V connecting
cable supplied with your camcorder. Set the input selector on the VCR to LINE.
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to tile audio input jack on tile VCR or tile TV. If you connect the
white plug, the sotmd is L (left) signal. If you connect the red plug, tile sotmd is R
0ight) signah
If your TV has an S video jack
Connect using an S video cable (not supplied) to obtain high quality pictures. With this
connection, you do not need to connect the yellow (video) plug of tile A/V connecting
cable.
Connect the S video cable (not supplied) to tile S video jacks on both yore camcorder
and tbe TV.
This connection produces higher quality DV format pictures.
To display the screen indicators on TV
Set DISPLAY to V OUT/LCD in tbe menu settings (p. 84).
Then press DISPLAY on your camcorder. To turn off the screen indicators, press
DISPLAY on your camcorder again.
27